geekbas.blogg.se - Motu 828 mk 2

#Motu 828 mk 2 for mac
#Motu 828 mk 2 plus
#Motu 828 mk 2 professional

Clip protection: Mic/guitar input limiter prevents digital clipping and distortion from overloaded signal levels up to +12dB over zero.

Mic/guitar instrument sends: Add your favorite outboard EQ, preamp, reverb, or other processor to the two mic/guitar inputs before the signal goes digital.

Two front panel combo jacks provide hi-Z 1/4″ guitar input or low-Z XLR mic input with phantom power, pad, and plenty of gain.

Multiple CueMix FX mixes: Create different monitor mixes for the main outs and headphones, or add send/return loops for outboard gear with no latency.

Standalone operation: Program your mixes at the studio and then bring the 828mk3 to your gig without your computer, tweak the mix onsite using the back-lit LCD and front-panel controls.

Front-panel control gives you access to any setting in your entire 828mk3 mix directly from the front panel.

Mic inputs, S/PDIF I/O, headphone out, and main outs are all handled as separate channels.

28 inputs/30 outputs (at 44.1/48 kHz): No channel sharing.

#Motu 828 mk 2 plus

CueMix FX: Flexible 28 input/16 bus mixer with on-board DSP effects, including reverb with sends/returns, plus EQ, and compression on every input and output.

#Motu 828 mk 2 for mac

You can also use the included AudioDesk workstation software for Mac giving you 24-bit recording/editing and 32-bit mixing/processing/mastering.

The 828mk3 FireWire interface provides cross-platform compatibility and will also work with all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. All mixing and effects parameters are adjustable using the front panel, backlit LCD. When you’re done programming the on-board mixing in the studio, you can unplug the MOTU unit from your computer and take it on the road for operation as a standalone mixer with effects. When recording from the mic/guitar inputs, the 828mk3’s signal overload protection gives you an extra 12dB of headroom above zero with no digital clipping or harsh artifacts. Apply hardware DSP-driven compression, EQ, and reverb to every input and output, independent of your host computer.

#Motu 828 mk 2 professional

Record, monitor, route, and process all of these live inputs using the professional on-board CueMix FX digital mixer - with no latency and no processor strain on your computer. This means you can connect all of your studio equipment – microphones, guitars, synths, keyboards, drum machines, and even effects processors. As an interface or standalone mixer, it provides 28 separate inputs and 30 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs. The 828mk3 interface is equally well-suited for studio and stage, with or without a computer.

Expand your system by connecting additional MOTU FireWire audio interfaces or the 8 pre mic input expander. It provides 10 channels of pristine, 192kHz analog recording and playback, combined with 16 channels of ADAT digital I/O and stereo S/PDIF.

The 828mk3 is MOTU’s most advanced FireWire audio interface, raising the bar with innovative features, enhanced standard features that remain unique, superb sound, and reliable performance. ออดิโออินเตอร์เฟส MOTU 828mk3 Firewire 28×30 USB/FireWire Audio Interface with 2 Microphone Preamplifiers, 8 TRS Inputs, 8 TRS Outputs, 2 XLR Outputs, 2 x ADAT I/O, MIDI I/O, Word Clock I/O, and Built-in Mixer with Onboard Effects – 24-bit/192kHz Resolution – Mac/PC คำอธิบาย MOTU 828mk3 Hybrid FireWire/USB2 Audio Interface